- 170 -Broadcasting livePress Wi-Fi button on this unit and touch [Live Cast].≥ If a “LUMIX CLUB” Login ID and Password has not been registered to this unit yet, enter themaccording to the screen.≥ You can register up to three wireless access points. When connecting to a wireless access point,this unit will try to connect to wireless access points one after the other. For example, if it fails toconnect to the first one, it will try to connect to the second one. (l 186)≥ If you touch [Change AP], you can switch the wireless access point to another one that has beenregistered to this unit.≥ When the connection is made correctly, the screen of this unit switches to the Live Cast Mode.∫ To send e-mailsYou can send e-mails containing such information as the USTREAM channel name or thescheduled broadcast date.≥ This unit can only set the scheduled broadcast date. (l 172) For other settings, set them on the“LUMIX CLUB”.≥ On the “LUMIX CLUB”, register the destination addresses of the e-mail in advance.Touch .≥ / / will disappear when no touch function isperformed for a specific period of time. To display them again,touch the screen.∫ To start the live broadcastTouch .≥ If you press the start recording button, you can simultaneouslyrecord the broadcast to this unit. The Backup for Twin Camerafunction is not available.≥ / / will disappear when no touch function isperformed for a specific period of time. To display them again,touch the screen.∫ To stop the live broadcastTouch .≥ When (gray) is displayed, unsent data is present. Wait until the unsent data is sent and isdisplayed.To exit the Live Cast Mode:Touch [EXIT] or press Wi-Fi button.≥ A message is displayed. Touch [YES] to exit.R 1h20mR 1h20mA [EXIT]R 1h20mR 1h20mA [EXIT]
