- 176 -Using the [Wi-Fi Setup Wizard] to set up a connectionWith the smartphone application “Image App”, you can transfer the following information betweenthe smartphone and this unit by using the NFC or QR code function.≥ Set [Direct Connection Password] in [Wi-Fi Setup] to [ON]. (l 187)(The default setting is [OFF].)* Acquire a Login ID and Password for the “LUMIX CLUB” on this unit in advance.≥ Install the smartphone application “Image App” on your smartphone. (l 174)≥ Set the NFC function of the smartphone to ON.1 Press Wi-Fi button on this unit and touch [Wi-Fi Setup].2 Touch [Wi-Fi Setup Wizard].3 Touch [YES].4 Start up the smartphone application “Image App”.5 Touch the smartphone on of this unit.≥ Touch the NFC touch area while the NFC mark is displayed on the smartphone screen.≥ If this is the first time the smartphone is connecting to this unit, touch [YES] on the screen of thisunit, and then touch the smartphone on of this unit again.≥ When the connection is complete, the setup screen is displayed on the smartphone.6 Follow the on-screen instructions of the smartphone to set up a connection.≥ When the settings is complete, the smartphone and this unit are connected directly, allowing youto use remote operations. (l 147)Set on the smartphone andtransfer to this unit≥ Clock information≥ Information on wireless access points (SSIDs and Passwords)≥ “LUMIX CLUB” Login ID, Password*Transfer from this unit to thesmartphone≥ Device ID for home monitoringIf the device is Android (NFC-compatible)
