- 27 -∫ About the screen indications in Still Picture Recording Mode∫ About the focusing areaWhen there is a contrasting object ahead or behind the subject in the focus area, the subject maynot be focused. If so, move the contrasting object out of the focus area.Recording still pictures in Motion Picture RecordingMode¬ Set this unit to Motion Picture Recording Mode (l 18)Press the button fully (press to the bottom) to take the picture.≥ It is possible to record still pictures while recording motion pictures.(Simultaneous recording)≥ While still pictures are being recorded, turns red and the remaining numberof recordable pictures is displayed.≥ No shutter sound is emitted when recording still pictures.≥ Self-timer (l 76) do not work.≥ While recording motion pictures or during the PRE-REC operation, image quality is different fromordinary still pictures so that motion picture recording takes preference over still picture recording.≥ /Simultaneous recording is not possible while you are recording a motion picture with [RECFORMAT] set to [4K MP4], when recording a motion picture in 4K Photo Mode or duringPRE-REC.≥ If simultaneous recording is performed during motion picture recording, the remaining recordabletime will be shortened. If this unit is turned off or the recording/playback button is pressed, theremaining recordable time may be lengthened.≥ The still picture recording time may be long depending on the picture size.≥ Maximum number of recordable pictures that can be displayed is 9999. If the number ofrecordable pictures exceeds 9999, R 9999+ is displayed. The number will not change when thepicture is taken until the number of recordable pictures is 9999 or less.≥ The recording time may be long depending on the recording condition.Still picture operation indicator (l 217)R3000 Remaining number of still pictures≥ Flashes in red when [0] appears.Size of still pictures (l 90)MEGA Optical Image Stabilizer (l 26)Optical Image Stabilizer (l 71)AF assist lamp (l 92)MEGAR3000R30002.1M≥ Screen display will disappear whenno touch operation is performed for aspecific period of time. To display itagain, touch the screen.≥ It will be constantly displayed whenthe remaining number of still picturesthat can be recorded becomes 200 orless.2.1MMEGAWX970 VX870
