- 38 -Please refer to page 43./The recording lamp lights up during recording and flashes when the unit receives a signalfrom the remote control or when the Self-timer is counting down.The recording lamp lights up during recording and flashes when the Self-timer is countingdown.When this is set to [OFF], it does not light during recording.Touch screen operation, starting and stopping of recording and unit on/off can be confirmedwith this sound.2 Beeps for 4 timesWhen an error occurs. Check the sentence displayed on the screen. (l 149)You can change the operation icons displayed in the Touch Menu.Register 3 favourite operation icons.≥ This function’s default settings are (Fade), (PRE-REC) and (BacklightCompensation) for Motion Picture Recording Mode, and (Built-in flash),(Self-timer) and (Backlight Compensation) for Still Picture Recording Mode.1 Touch [SELECT OPERATION ICONS].2 Touch the operation icon you would like to change to cancel the setting.3 Touch the operation icon to be set.≥ Name of the function is displayed by touching and holding on the operation icon.≥ To cancel, touch the operation icon again.4 Touch [ENTER].≥ For details about function of each operation icon, refer to page 51./[REMOTE CONTROL][ON]/[OFF][REC LAMP] [ON]/[OFF][ALERT SOUND] / /[OFF](Volume low)/ (Volume high)[SELECT OPERATIONICONS]HC-X900 HC-X900MHC-X900 HC-X900MHC-X800
