- 65 -Recording motion pictures with more vivid colours, using x.v.Colour™ technology.≥ Switch to Manual Mode. (l 74)≥ Set [REC MODE] to [HA], [HG], [HX], [HE] or [1080/50p]. (l 59)≥ For more realistic colours, use an HDMI mini cable (optional) with a TV that supports thex.v.Colour ™.≥ When motion pictures recorded while this function is turned [ON] are played backwith a TV not compatible with x.v.Colour™, colours may not be reproduced properly.≥ When these images are played back with devices other than ones compatible withx.v.Colour ™, it is recommended to record the images after this function is turned [OFF].≥ x.v.Colour ™ is a name for devices that are compatible with the xvYCC format, aninternational standard for expanded colour in motion pictures, and that follow the rules forsignal transmission.Message is displayed when this unit is moved rapidly.When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording.≥ Message will not appear while pausing the recording. (Message will appear even if it ispausing the recording if [DEMO MODE] is set to [ON].)This will reduce the wind noise coming into the built-in microphones while maintaining therealism.≥ Switch to Manual Mode. (l 74)≥ This function’s default setting is [ON].≥ When switching to Intelligent Auto Mode, [WIND NOISE CANCELLER] is set to [ON], andthe setting cannot be changed.≥ You may not see the full effect depending on the recording conditions.≥ /If wind sound cannot be reduced with the wind noise canceller function alone, set [BASSSETTING] to [LOWCUT]. (l 68)[Digital Cinema Colour]: [RECORD SETUP] # [Digital Cinema Colour] # [ON][SHOOTING GUIDE]: [RECORD SETUP] # [SHOOTING GUIDE] # [ON][WIND NOISE CANCELLER]: [RECORD SETUP] # [WIND NOISE CANCELLER] # [ON]MENUMENUMENUHC-X900 HC-X900M
