- 85 -Creating still picture from motion pictureA single frame from the recorded motion picture can be saved as a still picture.3D still pictures are created from the scenes recorded in 3D, and 2D still pictures are createdfrom the scenes recorded in 2D.( (1920k1080) still pictures will be recorded for the AVCHD scenes and iFrame scenes,and (640k360) still pictures will be recorded for the scenes saved in MP4.)Press the button fully at the location to be saved as a still pictureduring playback.≥ It is convenient to use Pause, Slow-motion Playback and Frame-by-frame Playback.≥ Date the motion picture was recorded will be registered as date of the still picture.≥ Quality will be different from the normal still picture.Highlight & Time Frame IndexAn image of one scene is displayed as a thumbnail at set search condition. Scene can beplayed back from any midway point of the scene you wish to see.≥ Operate the zoom lever to side and change overthe thumbnail display to Highlight & Time FrameIndex. (l 31)1 Touch .≥ To display the next (previous) page:j Slide the thumbnail display upward (downward) while touching it.j Touch (up)/ (down) on the thumbnail scroll lever.2 Touch the desired search condition.[3 SECONDS]/[6 SECONDS]/[12 SECONDS]/[MINUTES]/[FACE]*/[HIGHLIGHT]** It is not displayed on iFrame scenes and scenes saved in MP4.Playbackoperation Playback display Operating stepsDirect playbackDuring PlaybackTouch the Direct playback bar or slideit while touching.≥ The playback pauses temporarily andskips to the position touched or slid towhile touching.≥ Playback will start by releasing yourtouching or sliding finger.≥ /Direct playback bar cannot be operatedwith the remote control.HC-X900 HC-X900M2.1 M0.2 M
