130VQT1Y59* onlyIf faulty management information is found, one of the following messages may appear. Be sure to followthe messages. (Repairing may take time depending on the error.)*1 only*2 only≥ The following message is displayed when abnormal management information is detected when thescenes are displayed in thumbnail. To perform the repair, touch the scene with ° in the thumbnail,and start the playback. Please be aware that if the repair fails, scenes with ° will be deleted.≥ Use a sufficiently charged battery or the AC adaptor.≥ Depending on the condition of the data, it may not be possible to completely repair the data.≥ When data recorded on another device is recovered, it may not be possible to play back the data onthis unit or the other device.≥ If recovery fails, turn the power of the unit off and on again after waiting a while. If recovery failsrepeatedly, format a media on the unit. Please be aware that if a media is formatted, then all the datarecorded on the media will be erased.≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.DISCONNECT USB CABLE.The unit cannot correctly establish the connection to the PC, printer. Disconnect and then reconnectthe USB cable.About recoveryCONTROL DATA ERROR HAS BEEN DETECTED. (SD CARD)CONTROL DATA ERROR DETECTED IN THE BUILT-IN MEMORY.*1CONTROL DATA ERROR HAS BEEN DETECTED. (HDD)*2THUMBNAIL DATA ERROR IS DETECTED.SOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED. (IRREPARABLESCENES WILL BE DELETED.)
