47VQT1Y59This allows recording of the pictures and soundto start approximately 3 seconds before therecording start/stop button is pressed.1 Press the PRE-REC button.appears on the screen.≥ Aim this unit at the subject and position itsecurely.2 Press the recording start/stopbutton to start recording.≥ There is no beep sound.≥ After recording starts, the PRE-REC setting iscancelled.≥ PRE-REC is cancelled in the following cases.jIf you change the mode.jIf you open the SD card cover when the[MEDIA SELECT] is set to [SD CARD] inrecording mode.jIf you press the MENU button.jIf you turn the unit off.≥ When the remaining time left for recordingmotion pictures is less than 1 minute,PRE-REC cannot be set.≥ If you start recording less than 3 seconds afterpressing the PRE-REC button, or while thePRE-REC indication flashes within about3 seconds after initiating the quick startoperation, motion pictures for 3 secondscannot be recorded.≥ When the recording start/stop button ispressed, image shake and operation soundmay be recorded.≥ Images displayed on the thumbnail in playbackmode will differ from the motion picturesdisplayed at the start of playback.Message is displayed when this unit is movedrapidly.Select the menu. (l 27)≥ This function’s default setting is [ON].When “CAMERA PANNING IS TOO FAST.”appears, move the unit slowly while recording.≥ Set to [OFF] to turn off the messageindication.≥ Message will not appear while pausing therecording. (Message will appear even if it ispausing the recording if [DEMO MODE] is setto [ON])≥ In some recording conditions, messages maynot appear.PRE-RECThis prevents you missing a shot.PRE-RECPRE-RECShooting guide[RECORD SETUP] # [SHOOTING GUIDE]# [ON]
