Panasonic HDC-HS200 Operating Instructions Manual

Contents

Panasonic HDC-HS200 Operating Instructions Manual Manual pdf 57 page image

57VQT1Y59RecordingRecording (Basic)6 AF trackingIt is possible to set the focus and exposure to the subject specified on the touch screen.The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking)¬ Change the mode to or .1 Touch .A Target frame≥ will be displayed on the screen.≥ The prioritized face framing (orange) willchange to the target frame when theIntelligent auto mode is (Portrait), andit will track the face that was framed.≥ Available target lock range will be displayedin red frame when the Intelligent auto modeis set to anything but (Portrait).2 Touch the object and lock the target.≥ When you touch the head of the object, thetarget frame on the head gets locked andtracking starts.≥ Touch the object to be changed againwhen you want to change the target.≥ When the Intelligent auto mode is selected,the setting becomes (Normal) andtouched object is tracked. Selectionbecomes (Portrait) when target frameis locked on head.3 Start recording.≥ When you touch [CANCEL], the trackingfunction will be cancelled.∫ About target frame≥ The frame out assist B is displayed when thetarget frame gets close to framing out.≥ When target lock fails, the target frame blinks inred and then disappears. In such cases, touchthe object again and lock the target.≥ When the button is pressed halfway, thefocus is set to the object that is locked. Thetarget frame turns green when it focuses, andthe target cannot be changed.≥ This function cannot be used in manual mode.≥ This function cannot be used when the scenemode is set to the fireworks mode in stillpicture recording mode.≥ It may track different objects or may not lockthe target depending on the recordingconditions such as the following:jWhen the object is too large or too smalljWhen colour of the object is similar to thebackgroundjWhen using zoomjWhen the camera is shakingjWhen more than one object overlapsjWhen the scene is darkjWhen the subject moves quickly≥ When the target is locked in still picturerecording mode, the screen may become darkor the AF assist lamp may turn on.≥ A message will be displayed when an objectbecomes unable to be tracked half-way through.In such cases, touch the object one more time.≥ AF tracking will be cancelled in the following cases.jWhen the mode is changedjWhen the power is turned offjWhen the scene mode is setjWhen the Intelligent auto mode is set on/off≥ After setting [DISPLAY] to [OFF] if no operationis performed for about 3 seconds, the operationicon disappears. Touch the screen to displaythe icon again. When the AF tracking is used,the icon does not disappear.