32VQT1D38Setupª Concerning the SD card≥Do not touch the terminals on the back of theSD card.≥Electrical noise, static electricity or the failure ofthis unit or the SD card may damage or erasethe data stored on the SD card. Save importantdata recorded on this unit to a PC using theUSB cable (supplied), HD Writer Ver1.0E forSD1 etc. (l 100) (We recommend usingHD Writer Ver1.0E for SD1 to acquire datarecorded on this unit.)≥When using an SD card on which data hasbeen written many times, the remaining timeleft for recording may be reduced. (l 44)ª Card access lamp≥When this unit accesses the SD card (reading,recording, playback, erasing etc.), the accesslamp lights up.≥If the following operations are performed whenthe access lamp is lit, then the SD card or therecorded data may be damaged or this unitmay malfunction.– Opening the card slot cover and removingthe SD card– Operating the mode dial– Removing the battery or disconnecting theAC adaptorHow to use the cursor buttonThis unit has a cursor button A for selectingfunctions, performing operations etc. so it is easyto operate this unit with one hand.B Operating the operation icons and menuscreens that are displayedOperations on the menu screen and selection offiles on the thumbnail view screen etc.Move the cursor button up, down,left, or right to select an item orscene, and then press the cursorbutton to set it.1 Select by moving up.2 Select by moving down.3 Select by moving left.4 Select by moving right.5 Press the cursor button to set the item.≥Menu screen operations (l 36)Basic operationsBA13425
