Panasonic HDC-SD100 Operating Instructions Manual

Also see for HDC-SD100: Brochure Brochure & specs Operating instructions Operating instructions

Contents

Panasonic HDC-SD100 Operating Instructions Manual Manual pdf 119 page image

119VQT1T90Indications2 MessagesMajor confirmation/error messages to be indicated on the LCD monitor or the viewfinder in text.CANNOT BE USED DUE TO INCOMPATIBLE DATA.CANNOT RECORD - INCOMPATIBLE CONTROL DATA.The recording format of the SD card is different so it cannot be used. Save the data on the SD cardto a PC, then use the SD card after formatting it on this unit.CHECK CARD.This card is not compatible or it cannot be recognised by the unit.If this message appears even though motion pictures and still pictures are recorded on an SD card,the card may be unstable. Reinsert the SD card, then turn the power off and then on again.CARD LOCKED.The write protection switch on the SD card is set to LOCK. ( 19)THIS BATTERY CANNOT BE USED." Use a battery that is compatible with this unit. ( 15)If using a Panasonic battery compatible with this unit, remove the battery and then insert it again. Ifthe message appears even after repeating this several times, this unit needs repair. Detach thepower and consult the dealer who you purchased this unit from. Do not attempt to repair it byyourself." You are attempting to connect an AC adaptor not compatible with this unit. Use the supplied ACadaptor. ( 18)ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.An irregularity in the unit has been detected. Restart the unit by turning off and on the power.CANNOT CHECK CONNECTED DEVICE. DISCONNECT THE USB CABLE FROM THIS UNIT." The DVD burner is not correctly connected.Disconnect and then reconnect the Mini AB USB Connection Cable." Connect a DVD burner that is compatible with this unit. ( 92)PLEASE CHECK EXTERNAL DRIVE OR DISC.A disc that cannot be used when connecting the unit to the DVD burner has been inserted, or theDVD burner is not recognised properly. Connect the Mini AB USB Connection Cable again andinsert a disc to copy the data. ( 92)CANNOT COPY TO DISC WITH RECORDED IMAGES. INSERT DISC WITH NO RECORDEDIMAGES.Data cannot be copied since a disc that cannot be used by connecting the unit and the DVD burneror a used disc is inserted. Please use a new disc. ( 92)DISCONNECT USB CABLE.The unit cannot correctly establish the connection to the PC, printer. Disconnect and then reconnectthe USB cable.