80VQT1T90Editing2 Dividing a scene to deleteTo delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessaryportion.! Select [ ] (motion picture playback) while the mode dial is set to . ( 70)1 Select the menu. ( 22)2 Select the scene to be divided,then press the cursor button.3 Select [ ] to set the dividingpoint.Using slow-motion playback or frame-by-frameplayback makes it easy to search for the pointwhere you want to divide the scene. ( 71)When the confirmation message appears,select [YES], then press the cursor button.4 Press the MENU button tocomplete dividing.5 Delete the unnecessary scene.( 78)To continue dividing other scenesRepeat steps 2-3 before completing dividing instep 4.To delete all the divided pointsWhen the confirmation message appears,select [YES], then press the cursor button.All divided points set on this unit will becancelled.The scenes that were deleted after divisioncannot be recovered.When play mode is set to [INTEL. SCENE],scenes cannot be divided.Scenes cannot be divided if the number ofscenes played back on a selected date hasreached 99.It may not be possible to divide scenes with ashort recording time.If images that have been divided are playedback on another device, the points where thescenes join may not be clear.Data that has been recorded or edited onanother device cannot be divided and thedivided points cannot be deleted.When [CANCEL ALL] is selected, the dividedpoints of all scenes are deleted and the unitturns back to the setting that plays back allscenes even if you selected to play back thescenes by date.[EDIT SCENE] [DIVIDE] [SET] [DIVIDE] [CANCEL ALL]
