Panasonic HDC-SD5 Operating Instructions Manual

Also see for HDC-SD5: Operating instructions Brochure & specs

Contents

Panasonic HDC-SD5 Operating Instructions Manual Manual pdf 115 page image

Others115VQT1H64When the SD card is accessed, you try to playback a scene or faulty control information is read, one ofthe messages below may be displayed. (Depending on the error, this may take time.)When connecting to AC adaptor or the remaining capacity of the battery is enough:[FINISHED.]When the remaining capacity of the battery is low:[CANNOT REPAIR CONTROL INFORMATION DUE TO LOW BATTERY POWER.]When connecting to AC adaptor or the remaining capacity of the battery is enough:[THUMBNAIL DATA HAS BEEN REPAIRED SUCCESSFULLY.]When the remaining capacity of the battery is low:[CANNOT REPAIR CONTROL INFORMATION DUE TO LOW BATTERY POWER.]≥ Use a sufficiently charged battery or the AC adaptor.≥ Depending on the condition of the data, it may not be possible to completely repair the data.≥ If the recovery fails, you will no longer be able to playback the scenes recorded before the powerwent off.≥ When data recorded on another device is recovered, it may not be possible to play back the data onthis unit or the other device.≥ If the recovery fails, format the SD card on this unit.≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.CANNOT RECORD IN AGSMODE. The AGS function is activated. (l 40)PUSH THE RESETSWITCH.An irregularity in the unit has been detected. Press the RESETbutton to restart the unit. (l 120)CANNOT SET. The [GUIDE LINES], [ZEBRA], [MF ASSIST], [MIC LEVEL] and[RED EYE] menu settings cannot be set when the colour bar is set.CANNOT CHECKCONNECTED DEVICE.DISCONNECT THE USBCABLE FROM THIS UNIT.The DVD burner is not correctly connected.Disconnect and then reconnect the Mini AB USB Connection Cable.Connect a DVD burner that is compatible with this unit. (l 85)PLEASE CHECKEXTERNAL DRIVE ORDISC.A disc is not inserted in the DVD burner. Or, this unit and the DVDburner were connected and then a disc that cannot be used wasinserted. Connect this unit to the DVD burner and then insert a discthat can be used for copying. (l 85)PLEASE CHECK THEDISC.Copying is not possible as you connected this unit to the DVDburner and then inserted a disc that cannot be used or a used disc.Use a new disc. (l 85)DISCONNECT USBCABLE.The unit cannot correctly establish the connection to the computeror printer. Disconnect and then reconnect the USB cable.DISCONNECT USBCABLE.When the unit is connected to a computer or DVD burner, its powercannot be turned off.About recoveryCONTROL DATA ERROR HAS BEEN DETECTED.THUMBNAIL DATA ERROR IS DETECTED.