57VQT1H64RecordingWhen recording, the input level from the built-inmicrophones can be adjusted.¬ Rotate the mode dial to select .1 Press the MENU button, thenselect [VIDEO] # [MIC LEVEL] #[SETrAGC] or [SET] and pressthe cursor button.AGC: Auto Gain Control[AUTO]: AGC is activated, and therecording level is adjustedautomatically.[SETrAGC]: The desired recording level canbe set. AGC will also beactivated to reduce the amountof sound distortion.[SET]: AGC is not activated and sonatural recording can beperformed.2 Move the cursor button left orright to adjust the microphoneinput level.A LeftB RightC Microphone input level≥ A gain value for each of the 2 built-inmicrophones is displayed. (The input level ofthe microphones cannot be set individually.)3 Press the cursor button to setand then press the MENU buttonto finish the setting.D Microphone input level meter≥ Microphone input level meter is displayed onthe screen.To return to automatic settingPress the MENU button, then select [VIDEO] #[MIC LEVEL] # [AUTO], and press the cursorbutton.≥ Adjust the gain value so that the last 2 bars ofthe microphone input level on the centre of thescreen will not light red. (Otherwise, the soundis distorted.) Select a lower setting for gainvalue or set [MIC LEVEL] to [AUTO].≥ The microphone input level meter displays themicrophone input level for the built-inmicrophone with the larger volume.≥ When [ZOOM MIC] is [ON], the volume will bedifferent depending on the zoom rate. Set[ZOOM MIC] to [OFF] or set the microphoneinput level after adjusting the zoom rate.(l 49)Microphone levelThis is for adjusting the microphoneinput level.A BCD
