128VQT1H64Others≥ The memory capacity indicated on the label ofan SD card is the total of the capacity forcopyright protection and management and thecapacity which can be used on the unit, acomputer etc.≥ During prolonged use, the unit’s surfaces andthe SD card will heat up slightly. This is normal.Always set the mode dial to OFF wheninserting or removing an SD card.While an SD card is being accessed (whileor is displayed/ the card access lamplights up), do not open the SD card/batterycover and remove the SD card, operate themode dial, turn off the power or shake orimpact the unit.≥ Be sure to insert miniSD Cards in thededicated card adaptor before use. Inserting acard in this unit without the adaptor maydamage the unit or the card.≥ Do not insert an empty card adaptor in thisunit. Do not leave the adaptor in this unit whileinserting or removing miniSD Cards. This maycause the unit to malfunction.≥ When the LCD monitor gets dirty, wipe it with adry soft cloth.≥ In a place with drastic temperature changes,condensation may form on the LCD monitor.Wipe it with soft dry cloth.≥ When the unit has become very cold, forexample due to storage in a cold area, its LCDmonitor will be slightly darker than usualimmediately after the power is turned on. Thenormal brightness will be restored when theunit’s internal temperature rises.About the SD cardAbout the miniSD CardLCD monitorExtremely high precision technology isemployed to produce the LCD Monitor screenfeaturing a total of approximately300,000 pixels. The result is more than99.99% effective pixels with a mere 0.01% ofthe pixels inactive or always lit. However, thisis not a malfunction and does not affect therecorded picture.
