Others113VQT1H62When the SD card is accessed, you try to playback a scene or faulty control information is read, one ofthe messages below may be displayed. (Depending on the error, this may take time.)When connecting to AC adaptor or the remaining capacity of the battery is enough:[FINISHED.]When the remaining capacity of the battery is low:[CANNOT REPAIR CONTROL INFORMATION DUE TO LOW BATTERY POWER.]When connecting to AC adaptor or the remaining capacity of the battery is enough:[THUMBNAIL DATA HAS BEEN REPAIRED SUCCESSFULLY.]THIS BATTERY CANNOTBE USED.Use a battery that is compatible with this unit. (l 28)You are attempting to connect an AC adaptor not compatible withthis unit. Use the supplied AC adaptor. (l 30)If using a Panasonic battery compatible with this unit (l 28), ejectthe battery and then insert it again. If the message appears evenafter repeating this several times, this unit needs repair. Detach thepower and consult the dealer who you purchased this unit from. Donot attempt to repair it by yourself.AGS MODE ON-RECPAUSED The AGS function is activated. (l 42)PUSH THE RESETSWITCH.An irregularity in the unit has been detected. Press the RESETbutton to restart the unit. (l 118)CANNOT SET. The [GUIDE LINES], [ZEBRA], [MF ASSIST], [MIC LEVEL] and[RED EYE] menu settings cannot be set when the color bar is set.CANNOT CHECKCONNECTED DEVICE.DISCONNECT THE USBCABLE FROM THIS UNIT.The DVD burner is not correctly connected.Disconnect and then reconnect the Mini AB USB Connection Cable.Connect a DVD burner that is compatible with this unit. (l 83)PLEASE CHECKEXTERNAL DRIVE ORDISC.A disc is not inserted in the DVD burner. Or, this unit and the DVDburner were connected and then a disc that cannot be used wasinserted. Connect this unit to the DVD burner and then insert a discthat can be used for copying. (l 83)PLEASE CHECK THEDISC.Copying is not possible as you connected this unit to the DVDburner and then inserted a disc that cannot be used or a used disc.Use a new disc. (l 83)DISCONNECT USBCABLE.The unit cannot correctly establish the connection to the computeror printer. Disconnect and then reconnect the USB cable.DISCONNECT USBCABLE.You cannot turn off this unit while it is connected to a PC or a DVDburner.About recoveryCONTROL DATA ERROR HAS BEEN DETECTED.THUMBNAIL DATA ERROR IS DETECTED.
