57VQT1H62RecordingTo cancel the guide line functionPress the MENU button, then select [BASIC] or[PLAY SETUP] # [GUIDE LINES] # [OFF] andpress the cursor button.≥ The guide lines do not appear on the imagesactually recorded.≥ The guidelines are not displayed while rotatingthe LCD monitor frontward to record yourself.¬ Rotate the mode dial to select .Press the MENU button, then select[VIDEO] # [WIND CUT] # [ON] andpress the cursor button.To cancel the wind noise reductionfunctionPress the MENU button, then select [VIDEO] #[WIND CUT] # [OFF] and press the cursorbutton.≥ This function’s default setting is [ON].≥ The wind noise reduction depends on the windstrength. (The stereo effect may be reduced ifthis function is activated in strong winds.However, the stereo effect is automaticallyrestored when then the wind weakens.)When recording, the input level from the built-inmicrophones can be adjusted.¬ Rotate the mode dial to select .1 Press the MENU button, thenselect [VIDEO] # [MIC LEVEL] #[SETrAGC] or [SET] and pressthe cursor button.AGC: Auto Gain Control[AUTO]: AGC is activated, and therecording level is adjustedautomatically.[SETrAGC]: The desired recording level canbe set. AGC will also beactivated to reduce the amountof sound distortion.[SET]: AGC is not activated and sonatural recording can beperformed.2 Move the cursor button left orright to adjust the microphoneinput level.A LeftB RightC Microphone input level≥ A gain value for each of the 2 built-inmicrophones is displayed. (The input level ofthe microphones cannot be set individually.)Wind noise reduction functionThis is for reducing the wind noisecoming into the microphone whenrecording.Microphone levelThis is for adjusting the microphoneinput level.A BC
