33VQT1H62SetupInserting/removing an SDcardBe sure to set the mode dial to OFF beforeinserting/removing an SD card.1 Set the mode dial to OFF.≥ Check that the status indicator has gone off.2 While sliding the SD CARD/BATTERY OPEN lever A, movethe SD card/battery cover andopen it.3 Insert/remove the SD card into/from the card slot.≥ When inserting an SD card, face the label sideB in the direction shown in the illustration andpress it straight in as far as it will go.≥ When removing the SD card, press the centerof the SD card and then pull it straight out.4 Securely close the SD card/battery cover.≥ Securely close it until it clicks.ª About the SD card≥ Do not touch the terminals on the back of theSD card.≥ Electrical noise, static electricity or the failureof this unit or the SD card may damage orerase the data stored on the SD card. Werecommend saving the important datarecorded on this unit to a PC using the USBcable (supplied), HD Writer 2.0E for SX/SDetc. (l 102) (We recommend using HD Writer2.0E for SX/SD to acquire data recorded onthis unit.)≥ When using an SD card on which data hasbeen written many times, the remaining timeleft for recording may be reduced. (l 44)ª Card access lamp [ACCESS]≥ When this unit accesses the SD card (reading,recording, playback, erasing etc.), the accesslamp A lights up.≥ When the lamp is lit do notjOpen the SD card/battery cover and removethe SD card or the battery or disconnect theAC adaptor.jOperate the mode dialPerforming the above while the lamp is on mayresult in damage to data/SD card or this unit.If the SD card is inserted or removed whilethe power is on, this unit may malfunctionor the data recorded on the SD card maybe lost.A12BA
