Panasonic HDC-SD60K Operating Instructions Manual

Also see for H1 - Toughbook - Atom Z540: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic HDC-SD60K Operating Instructions Manual Manual pdf 118 page image

118VQT2M51≥ When the unit is connected to a PC, its power cannot be turned off.Disconnect the USB cable, before turning this unit off.≥ Do not disconnect the USB cable or the AC adaptor while the access lamp is on or cardaccess icon ( ) appears on the unit screen.≥ /Do not disconnect the USB cable or the AC adaptor while the access lamp is on or built-inmemory access icon ( ) appears on the unit screen.≥Do not disconnect the USB cable or the AC adaptor while the HDD access lamp is on orHDD access icon ( ) appears on the unit screen.≥ When performing reading/writing between a PC and an SD card, be aware that some SDcard slots built into PCs and some SD card readers are not compatible with the SDHCMemory Card or SDXC Memory Card.∫ To disconnect USB cable safely1 Double click the icon in task tray displayed on the PC.≥ Depending on your PC’s settings, this icon may not be displayed.2 Select [USB Mass Storage Device] and click [Stop].3Verify [MATSHITA HDC-SD60/SD USB Device] is selected and click [OK].Verify [MATSHITA HDC-TM55/SD USB Device] or [MATSHITA HDC-TM55/MEM USBDevice] is selected and click [OK].Verify [MATSHITA HDC-TM60/SD USB Device] or [MATSHITA HDC-TM60/MEM USBDevice] is selected and click [OK].Verify [MATSHITA HDC-HS60/SD USB Device] or [MATSHITA HDC-HS60/HDD USBDevice] is selected and click [OK].∫ Charging the battery by connecting it to different devicesWhen using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray discrecorder or Panasonic DVD recorder, the battery will charge.≥ When connecting this unit to a PC for the first time, make sure to connect this unit tothe PC with the power of this unit turned on.≥ Insert the USB cable securely all the way. It will not operate properly if it is not inserted allthe way.≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteedwith any other USB cables.)≥ Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.≥ During charging, the status indicator flashes. When charging is finished, the statusindicator turns off.≥ You cannot charge when the status indicator flashes rapidly for approx. 1 minute, or whenit does not light at all. Charge using the AC adaptor. (l 23)≥ It will take 2 or 3 times longer to charge compared to when using the AC adaptor.≥ Use the AC adapter to charge the large capacity battery (VW-VBK360; optional).≥ If the status indicator flashes at a particularly fast or slow rate, refer to page 136.