137VQT2M51When disposing of or giving away the SDcard, note that:≥ Formatting and deletion of this unit orcomputer only changes the filemanagement information and does notcompletely delete the data in the SD card.≥ It is recommended that the SD card isphysically destroyed or the SD card isphysically formatted using this unit whendisposing of or giving away the SD card.≥To physically format the SD card, connectthe unit via the AC adaptor, select[FORMAT CARD] # [YES] from themenu, and then press and hold the deletebutton on the screen below for about3 seconds. When the SD card datadeletion screen appears, select [YES],and then follow the on-screen instructions.≥ / /To physically format the SD card, connectthe unit via the AC adaptor, select[FORMAT MEDIA] # [SD CARD] from themenu, and then press and hold the deletebutton on the screen below for about3 seconds. When the SD card datadeletion screen appears, select [YES],and then follow the on-screen instructions.≥ The customer is responsible for themanagement of the data in the SD card.≥ When the LCD monitor gets dirty, wipe itwith a soft cloth such as eye glass cleaner.≥ Do not touch the LCD monitor with yourfinger nails, or rub or press with strongforce.≥ It may become hard to see or hard torecognize the touch when the LCDprotection sheet is affixed.≥ In a place with drastic temperaturechanges, condensation may form on theLCD monitor. Wipe it with a soft cloth suchas eye glass cleaner.≥ When the unit has become very cold, forexample due to storage in a cold area, itsLCD monitor will be slightly darker thanusual immediately after the power isturned on. The normal brightness will berestored when the unit’s internaltemperature rises.About the SD card LCD monitorExtremely high precision technology isemployed to produce the LCD Monitorscreen featuring a total of approximately230,000 dots. The result is more than99.99% effective dots with a mere 0.01%of the dots inactive or always lit.However, this is not a malfunction anddoes not affect the recorded picture.
