Panasonic HDC-SD60K Operating Instructions Manual

Also see for H1 - Toughbook - Atom Z540: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic HDC-SD60K Operating Instructions Manual Manual pdf 68 page image

68VQT2M51When recording, the input level from the built-in microphones can be adjusted.≥ Change the mode to .≥ Switch to Manual Mode. (l 74)1 Select the menu.2 Touch / to adjust the microphone inputlevel.≥ Touch to activate/disactivate AGC.When AGC is activated, the icon is surrounded byyellow and the amount of sound distortion can bereduced. When AGC is disactivated, natural recordingcan be performed.≥ Adjust the microphone input level so that the last 2 barsof the gain value are not red. (Otherwise, the sound isdistorted.) Select a lower setting for microphone inputlevel.3 Touch [ENTER] to determine the microphoneinput level and then touch [EXIT].≥ (Microphone input level meter) appears on the screen.≥ When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot bechanged.≥ When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.≥ The microphone input level meter shows the larger of the inputs from the 2 built-inmicrophones.≥ You cannot record with the audio completely muted.[MIC LEVEL]: [RECORD SETUP] # [MIC LEVEL] # desired setting[AUTO]: AGC is activated, and the recording level is adjustedautomatically.[SETr ]/[SET]: The desired recording level can be set.MENUA LeftB RightC Microphone input level