115VQT3K35∫ Dubbing using equipment without an SD card slot or a USB terminal,or using a video deviceYou can dub by connecting an AV multi cable.≥ Images are dubbed in standard quality.≥ Use the AC adaptor to free you from worrying about the battery running down.1 Connect this unit to a video device and then change the mode to.2 Start playback on this unit.3 Start recording on the connected device.≥ To stop recording (dubbing), stop playback on this unit after stopping recording on therecorder.≥ If the date and time display and function indication are not wanted, cancel them beforedubbing. (l 42, 99)Dubbing in standard picture qualityIf the dubbed images are played back on a wide-screen TV, the images may be stretchedvertically.In this case, refer to the operating instruction for the device you are connecting to or readthe operating instructions of the wide-screen TV and set the aspect ratio to 16:9.Change the video input on the videodevice and TV that this unit isconnected to.≥ The channel set will differ depending on theterminal to which the unit is connected.≥ See the operating instructions of the videodevice for details.≥ Insert the plugs as far as they will go.≥ Do not use any other AV multi cables exceptthe supplied one.A AV multi cable (supplied)
