87VQT3K35Highlight PlaybackPart that was recognized as clearly recorded is extracted from a long recording, and it can beplayed back in a short time with effects and music added.≥ Highlight playback cannot be used for iFrame scenes.1 Touch . (l 26)2 (Only when you would like to change the settings)Touch [SET] to select the item to change.3 Touch [START].≥ When the [SCENE SETUP] is not changed in step 2, it will playback with the last recordeddate.4 Select the playback operation. (l 36, 82)≥ When the playback is finished or stopped, the screen to select [REPLAY],[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.≥ Playing back of all the scenes returns if the unit is turned off or the mode is changed.≥ Slow-motion playback, frame-by-frame playback, and direct playback bar operation are not possible.≥ Highlight playback cannot be performed with interval-recorded motion pictures. (l 62)∫ Scene setting1 Touch [SELECT SCENES] or [SELECT DATE].2 (When [SELECT SCENES] is selected)Touch the scenes to be played back.≥ Up to 99 scenes can be selected in succession.≥ When touched, the scene is selected and is displayed.Touch the scene again to cancel the operation.(When [SELECT DATE] is selected)Touch the date to be played back.≥ A maximum of 7 days can be selected.≥ When touched, the date is selected and surrounded by red.Touch the date again to cancel the operation.3 Touch [Enter]/[ENTER].[SCENE SETUP]: Select the scene or date to be played back.[PRIORITY SETUP]: Select the target to give priority to play back. (l 88)[PLAYBACK TIME]: Select the time to play back. (l 88)[EFFECT SETUP]: Select the effect for playback. (l 88)[MUSIC SELECT]: Select the music to be played on playback. (l 88)ALL
