68VQT3K35Directivity of the microphone is synchronized with the zoom operation. Sounds near the frontof the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds arerecorded more realistically if you zoom out (wide angle).≥ Switch to Manual Mode. (l 75)When recording, the input level from the built-in microphones can be adjusted.≥ Switch to Manual Mode. (l 75)1 Select the menu.≥ It is possible to select the setting from the quick menu in Manual Mode. (l 40) Themicrophone level returns to the setting adjusted previously, and it cannot be set from thequick menu.2 (When [SETr ]/[SET] is selected)Touch / to adjust.≥ Touch to activate/disactivate AGC.When AGC is activated, the icon is surrounded byyellow and the amount of sound distortion can bereduced. When AGC is disactivated, natural recordingcan be performed.≥ Adjust the microphone input level so that the last2 bars of the gain value are not red. (Otherwise, thesound is distorted.) Select a lower setting formicrophone input level.3 Touch [ENTER] to set the microphone input level and then touch [EXIT].≥ (Microphone input level meter) appears on the screen.≥ When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot bechanged.≥ When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.≥ The microphone input level meter shows the larger of the inputs from the 2 built-inmicrophones.≥ You cannot record with the audio completely muted.[ZOOM MIC]: [RECORD SETUP] # [ZOOM MIC] # [ON][MIC LEVEL]: [RECORD SETUP] # [MIC LEVEL] # desired setting[AUTO]: AGC is activated, and the recording level is adjustedautomatically.[SETr ]/[SET]: The desired recording level can be set.MENUMENUA LeftB RightC Microphone input level
