24VQT1N58Setup5 Setting date and timeWhen the unit is turned on for the first time, a message asking you to set the date and time will appear.Select [YES] and perform steps 2 to 4 below to set the date and time.¬ Operate the mode switch to select.1 Select the menu. (l 21)2 Select the date or time to be set,then set the desired value withthe cursor button.≥ The year will change as follows:2000, 2001, ..., 2039, 2000, ...≥ The 24-hour system is used to display the time.≥ [ ] appears on the right top of the screenwhen [SET WORLD TIME] (l 26) is set to[HOME], while [ ] appears when it is set to[DESTINATION].3 Press the cursor button to enterthe selection.≥ The clock function starts at [00] seconds whenthe cursor button is pressed.4 Press the MENU button to finishthe setting.≥ Check the date and time displayed.Changing the date and time display modeSelect the menu. (l 21)[SETUP] # [DATE/TIME] # desired displaystyle≥ You can also show or change the date andtime display by repeatedly pressing the DATE/TIME button on the remote control.Changing the date formatSelect the menu. (l 21)[SETUP] # [DATE FORMAT] # desireddisplay style≥ To set daylight saving time, select the daylightsaving time in [HOME] for [SET WORLD TIME]after setting the clock.≥ The date and time function is driven by a built-in lithium battery.≥ If the time display becomes [- -], the built-inlithium battery needs to be charged. Use thefollowing steps to charge the battery.[BASIC] # [CLOCK SET] # [YES][DATE] [D/T][OFF]Display style Screen display[Y/M/D] 2008. 12. 15[M/D/Y] 12 15 2008[D/M/Y] 15. 12. 200815. 12. 2008 15:3015. 12. 2008
