122VQT1J42With a computerConnect the unit to the computer with a USBcable, select [PC CONNECT (DISC)] or[PC CONNECT (CARD)] on the USB functionselection screen and then follow the steps below.≥ With some computers including those made byNEC, the Device Manager may not bedisplayed if a mode that places restrictions onthe functions has been established. Consultthe manufacturer or follow the steps in yourcomputer’s operating instructions to establish amode in which all the functions can be used,then proceed with operation.1 (When using Windows XP/2000)Select [start] # ([Settings] #)[Control Panel] # ([Performanceand Maintenance] #) [System].(When using Windows Vista)Select [start] # [Control Panel] #[System and Maintenance] #[Device Manager].2 (When using Windows XP/2000)Click the [Hardware] tab, thenclick [Device Manager].3 Verify the following items aredisplayed.ª If the driver has been recognizedproperlyWhen using a disc:≥ [MATSHITA HDC-SX5(DVD) USB Device] isdisplayed at [DVD/CD-ROM drives].≥ [USB Mass Storage Device] is displayed at[Universal Serial Bus controllers].When using an SD card:≥ [MATSHITA HDC-SX5(SD) USB Device] isdisplayed at [Disc drives].≥ [USB Mass Storage Device] is displayed at[Universal Serial Bus controllers].ª If the driver has not beenrecognized properly[!] or [Unknown device] appears at [UniversalSerial Bus controllers] or [Other devices], etc.(Where the display will appear depends on thetype of computer you are using.)Use the following method to enable it to berecognized.Method 1:Turn off the unit and your computer once and tryagain.Method 2:Eject the disc or SD card and try verifying again.Method 3:Try connecting the unit to another USB port onyour computer.Verifying the unit is correctlyrecognized by the computer
