35VQT1J42Setupª About the remaining batterycapacity indicationThe remaining battery capacity is displayed inminutes when using the Panasonic battery thatyou can use for this unit. It may take time todisplay the remaining battery capacity.≥ The display changes as the battery capacityreduces.# # # # .If there is less than 3 minutes remaining, thenwill become red. If the batterydischarges, then will flash.≥ The remaining battery capacity may not bedisplayed correctly where the temperature islow or high or if the battery was not used for along period of time.To correctly display the remaining batterycapacity, recharge the battery, discharge it andthen charge it again. (Even if this operation isperformed, it may not be possible to display theremaining battery capacity correctly if thebattery was used for a long period of timewhere the temperature is low or high or if thebattery was repeatedly charged.)≥ The maximum amount of remaining batterycapacity able to be indicated is 999 minutes. Ifthe actual remaining time exceeds999 minutes, the indication will stay green andwill not change until the remaining time fallsbelow 999 minutes.≥ The time displayed is an approximation of theremaining time your battery will provide usefulpower. The actual time can vary depending onyour actual use.≥ When rotating the mode dial to switch modes,the time indication will turn off in order torecalculate the remaining battery capacitytime.≥ When using the AC adaptor or batteries madeby other companies, the remaining batterycapacity will not be shown.Connecting to the AC outlet1 Connect the AC cable to the ACadaptor and the AC outlet.2 Connect the DC cable to the ACadaptor.3 Connect the DC cable to the DCinput terminal DC IN 9.3V.≥ Do not use the AC cable with any otherequipment as it is designed only for this unit.Do not use the AC cable from other equipmentwith this unit.≥ While the DC cable is connected to the ACadaptor, the battery will not charge.90min
