22VQT2M75PreparationSetup1 Power supply∫ About batteries that you can use with this unitThe battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6.≥ This unit has a function to distinguish the batteries that can be used, and thebatteries (VW-VBG130/VW-VBG260/VW-VBG6) that are compatible with this function.(The batteries that are not compatible with this function cannot be used.)≥ To use the VW-VBG6 for this unit, the battery pack holder kit VW-VH04 (optional) is required.Important:If the DC cable is connected to the AC adaptor, then the battery will not charge.Remove the DC cable from the AC adaptor.1 Connect the AC cable to the AC adaptor and the AC outlet.2 Insert the battery into the AC adaptor by aligning the arrows.It has been found that counterfeit battery packs which look very similar to thegenuine product are made available to purchase in some markets. Some of thesebattery packs are not adequately protected with internal protection to meet therequirements of appropriate safety standards. There is a possibility that thesebattery packs may lead to fire or explosion. Please be advised that we are not liablefor any accident or failure occurring as a result of use of a counterfeit battery pack.To ensure that safe products are used we would recommend that a genuinePanasonic battery pack is used.Charging the batteryWhen this unit is purchased, the battery is not charged. Charge the battery beforeusing this unit for the first time.Charging lamp[CHARGE] ALights up:Charging (Battery charging time: l 24)Goes off:Charging completedFlashing:Be sure to connect the unitcorrectly. (l 143)
