74VQT2M75When recording, the input level from the built-in microphones and the external microphoneterminal can be adjusted.≥ Change the mode to .≥ Switch to Manual Mode. (l 82)1 Select the menu.≥ It is possible to select the setting from the quick menu in Manual Mode. (l 45) Themicrophone level returns to the setting adjusted previously, and it cannot be set from thequick menu.2 Touch / to adjust the microphone inputlevel.≥ Touch to activate/disactivate AGC.When AGC is activated, the icon is surrounded byyellow and the amount of sound distortion can bereduced. When AGC is disactivated, natural recordingcan be performed.≥ Adjust the microphone input level so that the last2 bars of the gain value are not red. (Otherwise, thesound is distorted.) Select a lower setting formicrophone input level.3 Touch [ENTER] to determine the microphoneinput level and then touch [EXIT].≥ (Microphone input level meter) appearson the screen.≥ When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot bechanged.≥ When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoomrate.≥ When [MIC SETUP] is set to [STEREO MIC] or external microphone input is used, thesound is stereo (2 ch) and only the front-left and front-right input level meters function.≥ The microphone input level meter shows the largest volume for the microphones.≥ You cannot record with the audio completely muted.[MIC LEVEL]: [RECORD SETUP] # [MIC LEVEL] # desired setting[AUTO]: AGC is activated, and the recording level is adjustedautomatically.[SETr ]/[SET]: The desired recording level can be set.A CenterB Front leftC Back leftD Front rightE Back rightF Microphone input level
