51VQT2M75Please be aware that if a medium is formatted, then all the data recorded on the medium will beerased and cannot be restored. Back up important data on a PC, DVD disc etc. (l 109, 117)1 Touch [FORMAT MEDIA].2Touch [SD CARD] or[Built-inMemory].Touch [SD CARD] or [HDD].≥ When formatting is complete, touch [EXIT] to exit the message screen.≥ Perform a physical formatting of the SD card when the SD card is to be disposed/transferred. (l 144)≥ Perform a physical formatting of the built-in memory/HDD when this unit is to be disposed/transferred. (l 142)≥ Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit tovibrations or shock.The amount of space left on the SD card, the built-in memory and HDD can be checked.(Only when the mode is at the position)≥ Touching [CHANGE MEDIA] switches the unit between the display for the SD card and thedisplay for the built-in memory/HDD.≥ Touch [EXIT] or press the MENU button to close the indication.≥ The SD card, built-in memory or built-in HDD requires some space to store information andmanage system files, so the actual usable space is slightly less than the indicated value.The usable built-in memory/HDD space is generally calculated as 1 GB=1,000,000,000bytes. The capacities of this unit, PCs and software are expressed as1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of thecapacity appears to be smaller.Perform the touch screen calibration if a different object to the one touched is selected.1 Touch [CALIBRATION ].≥ Touch [ENTER].2 Touch the [_] that appears on the screen with the supplied stylus pen.≥ Touch [_] in sequence (up left # down left # down right # up right # center).3 Touch [ENTER].≥ Calibration cannot be performed when the LCD monitor is turned 180o.[FORMAT MEDIA]Use this unit to format media.Formatting built-in memory or HDD is only available with this unit.Do not format an SD card using any other equipment such as a PC. The card maynot be used on this unit.[MEDIA STATUS][CALIBRATION]
