Panasonic HG-C1000L Series Instruction Manual

Also see for HG-C1000L Series: Instruction manual

1INSTRUCTION MANUALMicro Laser Distance Sensor for IO-Link (CMOS)ME-HGC1000LV1EN 09/2018Thank you very much for purchasing Panasonic products. Please read thisInstruction Manual carefully and thoroughly for the correct and optimumuse of this product. Kindly keep this manual in a convenient place for quickreference.WARNING● This product is intended to detect objects. Do not use it to carry outsafety control functions to prevent accidents.● Never use this product as a sensing device for personnel protection.● Do not look into the beam directly during operation.1 CE markingThis product complies with the following standards andregulations.● For the EU: EMC Directive 2014/30/ECContact for CE:Panasonic Marketing Europe GmbHPanasonic Testing CenterWinsbergring 15, 22525 Hamburg, Germany2 Confirmation of packed content● Sensor 1pc.● Laser warning label (JIS Standards, GB Standard) 1 set each● FDA certification label 1pc.● Instruction Manual (Japanese, English) 1pc. perlanguage3 Safe use of laser productIn order to prevent accidents caused by laser products and to protect theusers, IEC, JIS and FDA established the following standards:IEC: IEC 60825-1-2014 (EN 60825-1-2014)JIS: JIS C 6802-2014FDA: PART 1040 (Performance standards for light-emitting products)These standards classify laser products according to their level of hazardand provide safety measures for the respective classes.Warning label and positionLASER RADIATIONLASER APERTURECLASS2 LASER PRODUCT(IEC60825-1 2007)(MAXIMUM OUTPUT) 1mW(PULSE DURATION) 5ms max.(WAVELENGTH) 655nmDO NOT STAREINTO BEAMAn English warning label is attached to this product.4 Part description5 6 7891234No. Item1 Zero set indicator (Yellow) Lights when the zero set function isenabled.2 Teaching indicator (Yellow). Lights when teaching is in process3 Output operation indicator(Orange) Lights when the output is on4 Laser emission indicator(Green) Lights when the laser beam is ON5 TEACH key6 UP key7 DOWN key8 Digital indicator (Red)9 PRO indicator (Yellow)Lights in Pro modeFlashes in normal status during IO-LinkcommunicationOFF in normal status without IO-Linkcommunication5 Mounting● When mounting this product, use M3 screws (prepare separately).Use a tightening torque of 0.5 N m for mounting.● When mounting this product using the sensor mounting bracket (op-tional), also use a tightening torque of 0.5N·m37mm18mmM3 screws Mounting hole dimensionsIf the fixed ring loosens, the connector will come off, causing this product to gen-erate a communication error. Before use, check that the fixed ring is not loose.● Firmly tighten the fixed ring by rotating it. Fixed ringMounting direction● When performing measurements of moving objects with excessivelydifferent materials and colors, mount the product in the following direc-tions to minimize measurement errors.● When performing measurements of rotating objects, mount the prod-uct as follows. The effect of up/down deflection and position deviationcan be minimized by mounting the sensor in the correct direction.HG-C1000L Series