Panasonic HL-C2 Series User Manual

Also see for HL-C2 Series: User manual User manual User manual User manual

Contents

Chapter 4 Explanation of Functions4-824■ Status ReadoutThis function checks the status of the measurement data accumulation.Use this function for checking the accumulation status before reading theaccumulated data. After having checked the status, the controller replies one of thenext status.Status ContentsNon-bufferingBuffering operation is not executed at all after turning on the powersupply or after initialization, or buffering operation is stopped whilewaiting for trigger after buffering has started.Wait for trigger Wait for trigger status after buffering operation has started.AccumulatingBuffering operation has started and measurement data is beingaccumulated, or trigger has being generated and measurement data isbeing accumulated.AccumulationcompletedAccumulation amount has reached the setting value or the bufferingoperation has stopped.■ Final Data PointThe accumulation status can be read from the data amount.“Final Data Point” is set to “0” when the “Status Readout” is set to “Non-buffering”.■Trigger Counter ReadoutWhen the buffering mode is set to sample trigger mode, the number oftimes of the final trigger generation can be read out.When readout of the trigger counter is performed, stop the data accumulationoperation and confirm the “Final Data Point”. If the result of “StatusReadout” is indicated as accumulation completed and the “Final Data Point”is any values other than “0”, readout of the trigger counter can be started.