Chapter 8 Specifications8-288-1 Controller Specifications● RS-232C typeModel No. HL-C2C(E) HL-C2C(E)-PSupply voltage 24VDC ±10% Including ripple 0.5V (P-P)CurrentconsumptionApprox. 500mA at 2 sensor heads connectedApprox. 350mA at 1 sensor head connected(Approx. 100mA is additionally required when the compact programmable display is connected.)Sampling cycle 10μs, 20μs, 40μs, 100μs, 200μs, 400μs, 1ms, 2msAnalogoutputVoltage*1Voltage output scale: -5 to +5V/F.S (initial value)Output range during normal status: -10.0 to +10.0VOutput at abnormal status: -10.8V or +10.8VResolution: 2mV, Linearity: ±0.05% F.S.Max. 2mA, output impedance 50Ω, Response delay time: Approx. 1.5μs/VCurrent*2Current output scale: 4 to 20mA/F.S (initial value)Output range during normal status: 2 to 24mAOutput at abnormal status: 1mA or 25mAResolution: 3mA, Linearity ±0.05% F.S.Load impedance: 250Ωmax., Response delay time: Approx. 10μsAlarm outputNPN transistor open collectorMaximum in-flow current: 100mAApplied voltage: 3 to 30VDC(ALARM output to Common(-))Residual voltage: 1V or less(at in-flow current of 100mA)Leak current : 0.05mA or lessPNP transistor open collectorMaximum out-flow current: 100mAApplied voltage: 3 to 30VDC(ALARM output to +V)Residual voltage: 1V or less(at out-flow current of 100mA)Leak current : 0.05mA or lessOutput operation Open when the output is ON (Light intensity is insufficient).Short circuit protection Incorporated (Auto-reset)Judgment output(HI, GO, LO）NPN transistor open collectorMaximum in-flow current: 100mAApplied voltage: 3 to 30VDC(Judgment output to Common(-))Residual voltage: 1V or less(at in-flow current of 100mA)Leak current : 0.05mA or lessPNP transistor open collectorMaximum out-flow current: 100mAApplied voltage: 3 to 30VDC(Judgment output to +V)Residual voltage: 1V or less(at out-flow current of 100mA)Leak current : 0.05mA or lessOutput operation Open when the output is ON(output operates).Short circuit protection Incorporated (Auto-reset)Strobe outputNPN transistor open collectorMaximum in-flow current: 100mAApplied voltage: 3 to 30VDC(Strobe output to Common(-))Residual voltage: 1V or less(at in-flow current of 100mA)Leak current : 0.05mA or lessPNP transistor open collectorMaximum out-flow current: 100mAApplied voltage: 3 to 30VDC(Strobe output to +V)Residual voltage: 1V or less(at out-flow current of 100mA)Leak current : 0.05mA or lessOutput operation Open when the output is ON(data is determined).Short circuit protection Incorporated (Auto-reset)
