Panasonic HL-C2 Series User Manual

Also see for HL-C2 Series: User manual User manual User manual User manual

Contents

Chapter 4 Explanation of Functions4-8844-4-3 Memory Save and Terminal SettingThe setting contents for each function can be stored in 16 different patternsin the controller memory.This function stores the measurement or judgment conditions for eachmeasurement object respectively, so without re-inputting of various functionsetting, the condition change can be performed only by changing the memory No.“Memory change” can be executed by “Compact Programmable display” or“External Terminal Input (M0 to M3)”.■ Storable Functions in MemoryThe function settings which can be stored in the memory are divided into two types.One is the function which can be stored in each specified memory No., and anotheris the function which can be stored as common setting value among all memories.For the detail of the above two type storable functions, refer to “4-3 FunctionList & Initial Values”.■ Memory Change Procedure by External Input Terminal1 Select Memory No. to be stored.For setting by compact programmable display, refer to “4-3-4 SystemSetting” – “Memory Change”.2 After selecting memory No., input the setting value for each function.For memory changeable functions, refer to “4-3 Function List & InitialValues”.3 Set “Terminal” at “Priority Setting of Memory Change”.For “Priority Setting of Memory Change”, refer to “4-3-4 System Setting”– “Priority Setting of Memory Change”.4 Execute all memory save.If not doing so, “Terminal” cannot be set.For “Save” function, refer to “4-3-4 System Setting” – “Save”.5 Set the memory No. to be used to the external terminal input (M0 - M3).*The setting can be input by manually on the compact programmable display,or by the command of RS-232C and USB communication control, orIntelligent Monitor AiM.With the above five steps, the memory No. change can be performed by theexternal input terminal.