12 VQT3N87∫ When inner side of the lens is fogged (condensation)It is not a malfunction or failure of this unit. It may be caused by theenvironment in which this unit is used.What to do when inner side of the lens is fogged≥ Turn off the unit and open the door/cover in a place with constantambient temperature, away from high temperatures, humidity, sandand dust. The fog will disappear naturally in 10 minutes to 2 hours withthe door/cover open when the temperature of this unit gets close to theambient temperature.≥ Contact Panasonic’s Service Center if the fogging does not disappear.Conditions in which inner side of the lens may be foggedCondensation may occur and the inner side of the lens may be foggedwhen this unit is used in areas that undergo a significant change intemperature or in high humidity, such as the following:≥ When this unit is used underwater suddenly after being on a hotbeach etc.≥ When this unit is moved to a warm area from a cold area, such asat a ski resort or at high altitude≥ When the door/cover is opened in a high-humidity environment1 Check that there are no foreign objects on the innerside of the door/cover.≥ If there is any foreign object, such as lint, hair, sand, etc., on thesurrounding area, water will leak within a few seconds causingmalfunction.≥ Wipe it off with a dry soft cloth if there is any liquid.It may cause water leaks and malfunction if you use this unit withliquid adhered.≥ If there is any foreign material, remove with the lint-free cloth.≥ Be extremely careful to remove any sand etc. that may adhere tothe sides and corners of the rubber seal.Check before using underwaterDo not open or close the door/cover in places with sand anddust, close to water, or with wet hands. Sand or dust adheringmay cause water leaks.