Panasonic HM-TA2 Owner's Manual

Also see for HM-TA2: Operating instructions Owner's manual

Contents

Panasonic HM-TA2 Owner's Manual Manual pdf 35 page image

VQT3N87 35When in Motion Picture Recording Mode1 Press the Recording button to start recording.≥ When you begin recording, ; changes to ¥.2 Press the Recording button again to pauserecording.≥ The images recorded between pressing the Recording button to startrecording and pressing it again to pause recording become one scene.≥ In the following cases, the countdown until the recording is stopped will start fromapprox. 30 seconds and the recording will stop when the display reaches 0 second.j When the total of the capacity of the SD card is about to be used during the recording.j When the recording time reaches near the maximum continuousrecordable time for a single scene. (l 90)≥ Please refer to page 90 for details on continuous recordable time for a single scene.≥ Maximum number of recordable scenes on a single SD card is 899100.≥ Operation sound may be recorded when you perform touch operationwhile recording.∫ About the screen display when recording motion pictures: Recording mode¥: Recording motion picture;: Recording pause01h30m: Remaining time for motion picturerecording00m00s: Elapsed recording time≥ “h” is an abbreviation for hour, “m” for minuteand “s” for second.Recording motion picturesAbout the compatibility of the recorded motion pictures≥ They are not compatible with devices other than those that supportMP4. Images cannot be played with equipment that does notsupport MP4. Confirm that your equipment supports MP4 byreferring to the operating instructions.≥ There are some cases where the recorded motion pictures cannotbe played back, even if the device supports MP4. In such cases,play the recorded motion picture with this unit instead.01h30m01h30m01h30m