VQT3N87 31PreparationTurning the unit on/offPress the power button to turn on the unit.≥ The LCD monitor lights on.To turn off the unitContinue pressing the power button until the LCD monitor goes off.∫ About the screen displayPlease refer to page 74 for details of the icons displayed on the screen.∫ About the power save functionTo prevent battery consumption, it will turn off thescreen and go into idle mode after approx.2 minutes of no operation. (The status indicator Aflashes.)The unit will be turned off automatically if nooperation is performed for a further 5 minutes (approx.) while in idlemode.≥ Idle mode is canceled by pressing the Power button or Recordingbutton.∫ About the high temperature warning iconWhen the high temperature warning icon is displayed, thetemperature of the unit is high.≥ It is possible to continue recording/playback when is displayed,but it is recommended to stop operations and turn off the unit as soonas possible.≥ If the temperature rises further, the unit will be turned off automaticallyafter flashes. You will not be able to turn on the unit again until thetemperature lowers ( will flash.), so wait until the temperaturelowers before using again.≥ A countdown until the recording is stopped will start from approx.15 seconds during motion picture recording, and the recording will stopwhen the display reaches 0 seconds.≥ When you turn off the unit while the temperature is high ( isdisplayed.), you will not be able to turn on the unit again until thetemperature lowers. ( will flash.)
