22System settings tool13. System settings tool13.1 IntroductionThe HMe series panels have a system settings interface to allow the configuration of system options.The user interface of “System Settings” is based on HTML pages accessible locally on HMI or remoteusing a web browser, e.g. Chrome v44 or higher on port 443 (https://IP/machine_config). The defaultusername is “admin”, and the default password is “admin”.Use the navigation menu on the left side of the screen to browse through the available options.On the left side, the selected menu item is highlighted. The right side shows related information andsettings. Based on the size of the panel, menu and content of the selected menu item may not bedisplayed next to each other on the screen.The system settings interface has two operating modes:User mode HMWIN runtime is running or the status of the HMI panel is set to “factory default”.System mode HMWIN runtime is not running or there is a software failure.The system mode includes all options available in user mode. In addition, thesystem mode offers commands dedicated to system upgrade and recovery whichare not available in user mode.13.2 Activation of system settings in user modeHMWIN runtimenot runningTouch the “System Setting” button on the HMI panel.HMWIN runtimerunningTo activate the system settings in user mode, touch and hold any unused areaof the touch screen for a few seconds to access the context menu. The defaultholding time is 2 seconds.