Panasonic HMe Series Instruction Manual

Also see for HMe Series: Instruction manual Instruction manual

8Technical data common to all models6. Technical data common to all models6.1 Hardware specificationsTouch screen technology ResistiveReal-time clock back-up SupercapacitorFuse AutomaticSerial port RS232, RS485, RS422 software configurableRecipe memory FlashReal-time clock Clock/calendar with supercapacitor back-upAccuracy real-time clock(at 25°C)<100ppm6.2 Environmental conditionsOperating temperature(surrounding air temperature)0 to +50°C EN 60068-2-14Storage temperature -20 to +70°C EN 60068-2-14Operating and storage humidity 5–85% RH not-condensing EN 60068-2-30Vibrations 5–9Hz, 7mm p-p9–150Hz, 1gEN 60068-2-6Shock ±50g, 11ms, 3 pulses per axis EN 60068-2-27Degree of protection IP66 front panel (see note) EN 60529Pollution degree environment 2* The front face of the unit, installed in a solid panel, has been tested using conditions equivalent to the stan-dards shown in the “Environmental conditions”. Even though the level of resistance unit is equivalent to thesestandards, oils that should have no effect on the HMe can possibly harm the unit. This can occur in areaswhere either vaporized oils are present, or where low viscosity cutting oil are allowed to adhere to the unit forlong periods of time. If the front face protection sheet on the HMe becomes peeled off, these conditions canlead to the ingress of oil into the unit and separate protection measures are suggested.If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from thepanel, the original degree of the protection cannot be guaranteed.