23System settings tool13.3 Activation of system settings in system modeNormaloperationIf HMWIN runtime is not running:Touch the “System Setting” button on the HMI panel to open the system settings inuser mode. Select “Restart” > “Config OS” to reboot in system mode.If HMWIN runtime is running:To activate the system settings in user mode, touch and hold any unused areaof the touch screen for a few seconds to access the context menu. The defaultholding time is 2 seconds. Select “Restart” > “Config OS” to reboot in systemmode.RecoveryoperationIf the HMI panel is not responsive, tap on the surface of the touch screen duringthe power-up phase of the panel. The tapping frequency must be high. Start tap-ping the touch screen as soon as power has been supplied to the panel.The message “TAP-TAP DETECTED” appears when the operating sequence hasbeen recognized. Release the touch screen to boot in user mode without runningHMWIN runtime or touch and hold the touch screen for a few seconds. Then select“Restart” > “Config OS” to boot in system mode.13.4 Options available in system settingsThe following important basic setting options of the panel are available:Language Configure the language used for the system setting menu only.System Shows information about platform, status and timers (e.g. systemon time, backlight on time).Logs Enable persistent log for BSP and allows to export it.Date & Time Change the date and time of the panel, including time zone andNTP server.Network Configure the IP address of the Ethernet interface and the othernetwork settings, e.g. DNS, gateway, DHCP, hostname.Services Enable/disable services, e.g. OpenSSH server, cloud services,SNMP and logging.Management Update BSP components (Main OS, Config OS, Boot loader,XLoader), check partition consistency, update the splash screen,show the usage and size of partitions.The update of “Main OS” is only available in system mode. Theupdate of “Config OS” is only available in user mode.Display Adjust the brightness, configure automatic backlight turnoff andselect HMI orientation (90°, 180°, 270° and 360°).Restart Restart the panel.Select “Main OS” to restart the panel in user mode (default set-ting). Select “Config OS” to restart the panel in system mode andopen the system settings.Authentication Configure the administrator (“admin”) and the standard user(“user”) password. An administrator has full access to the “SystemSettings” (e.g. BSP updates and other system components). Astandard user has some limitations.NOTEThe system settings tool includes also other options that are not described and not documented in thismanual. For details, please refer to the HMWIN User Manual.