Panasonic K-NL404K/G User Manual

Also see for K-NL404K/G: Quick start guide

Contents

Panasonic K-NL404K/G User Manual Manual pdf 155 page image

149If system finds the previous information and the channel is idle, system can map it to thepreviously used channel. Otherwise system goes to the next step.c) Thirdly, according to the --- map, system can know the previousmapping channel of current PoE port. System can select current channel if it is free.Otherwise, it goes to the next step:d) Fourthly, system goes to find the first idle channel it can get.Generally speaking, once you insert PoE, system follow the steps listed above to find the channelavailable.4) When you insert PoE, all channels are in use now.System can pop up a dialogue box for you to select a channel to overwrite. The title of the pop-upinterface is the name of the current operation PoE port. In this interface, All PoE channel become greyand cannot select.5.1.2 Log inOpen the IE and then input the NVR IP address in the address column.For example, if your NVR IP address is 192.168.0.250, then please input http://192.168.0.250 in IEaddress column. See Figure 5-1.Figure 5-1System pops up warning information to ask you whether install webrec.cab control or not. Please clickyes button.If you can’t download the ActiveX file, please modify your settings as follows. See Figure 5-2.Input IPaddress here.