2015.8.4 Storage5.8.4.1 BasicIt is to manage HDD storage space.Step 1 From main menu->Setup->Storage->Basic.Enter Basic interface. See Figure 5-59.Figure 5-59Step 2 Set parameters.Parameter FunctionHDD full It is to select working mode when hard disk is full.There are two options: stop recording or rewrite. Stop: If current HDD is full while there is no idle HDD, then systemstops recording, Overwrite: If the current HDD is full while there is no idle HDD, thensystem overwrites the previous files.PackdurationIt is to specify record duration. The max value is 120 minutes.Autodelete oldfiles Never: Do not auto delete old files. Customized: input customized period here, system can auto deletecorresponding old files5.8.4.2 ScheduleIn this interfaces, you can add or remove the schedule record setup. See Figure 5-60.There are four record modes: general (auto), motion detect, alarm and MD&Alarm. There are six periodsin one day.You can view the current time period setup from the color bar. Green color stands for the general record/snapshot. Yellow color stands for the motion detect record/snapshot.. Red color stands for the alarm record/snapshot. Blue color stands for MD&Alarm record/snapshot.
