Panasonic K-NL404K/G User Manual

Also see for K-NL404K/G: Quick start guide

Contents

Panasonic K-NL404K/G User Manual Manual pdf 57 page image

514.7 Record and SnapshotThe record/snapshot priority is: ALARM->MOTION DETECT->SCHEDULE.4.7.1 ENCODE4.7.1.1 EncodeEncode setting is to set IPC encode mode, resolution, bit stream type and etc.From Main menu->SETTING->REMOTE->ENCODE, you can see the following interface. See Figure4-46. Channel: Select the channel you want. Code-Stream Type: Please select from the dropdown list. There are some options: regular/motiondetect/alarm. You can set the various encode parameters for different record types. Compression: System supports H.265, H.264, MJPEG. Resolution: The mainstream resolution type is IPC’s encoding config. Generally there isD1/720P/1080P. Frame Rate: It ranges from 1fps to 30fps in NTSC mode and 1fps to 25fps in PAL mode. Bit Rate Type: System supports two types: CBR and VBR. In VBR mode, you can set video quality. Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image quality. Bit Rate：You can select bitrate value in the combo box. Audio/Video: You can enable or disable the video/audio. Please note, once you enable audiofunction for one channel, system may enable audio function of the rest channels by default. Copy：After you complete the setup, you can click Copy button to copy current setup to otherchannel(s). You can see an interface is shown as in Figure 4-47 You can see current channelnumber is gray. Please check the number to select the channel or you can check the box ALL.Please click the OK button in Figure 4-47 and Figure 4-46 respectively to complete the setup.Please note, once you check the All box, you set same encode setup for all channels. Audio/videoenable box, overlay button and the copy button is shield.Please highlight icon to select the corresponding function.