31Sending Faxes1 Open the document cover.2 Place the document FACE DOWN on thescanner glass, matching the top edge of thedocument to the “TOP” mark on the unit.3 Close the document cover.l If the original is a thick book, do not closethe document cover.4 If necessary, press urepeatedly to select the desired setting(p. 30).5 Enter the fax number.Example:l To send a single page, skip to step 9.l To send multiple pages, go to next step.6 Press ê to scan the document intomemory.Example:!7 Place the next page on the scanner glass.NEXT:PRESS SCANSEND:PRESS STARTPAGES=01 01%STANDARDNO.=5678901Using the scanner glassBy using the scanner glass, you can send a page from booklets or small sized paper that cannotbe sent with the auto document feeder.l Confirm that there are no documents in the auto document feeder.DocumentcoverScanner glassFAX STARTRESOLUTIONSCANSTOPTOPTo stop transmissionPress {.Sending report for confirmationThis report will provide you with a printed recordof transmission results. To use this feature,activate feature #04 (p. 56). For thecommunication message in the result column,see page 61.8 Press ê.l To send more pages, repeat steps7 and 8.9 Press i.CONNECTING.....NEXT:PRESS SCANSEND:PRESS STARTJournal reportThe unit stores the 30 most recent faxcommunication results.— To print manually, see page 75.— To print automatically after every 30 new faxcommunications, activate feature #22 (p. 58).For the communication message in the resultcolumn, see page 61.Note for the auto document feeder and the scanner glass