Features Summary64Advanced features!How to set menu optionsProgramming tableCode#22Setting the journal report to printautomaticallyAUTO JOURNAL=ON [±]ONOFFTo send a document:1. Insert the document.2. Follow steps 1 and 2 above.3. Press + or - to select “ON”.4. Press w.5. Enter the fax number.6. Press w.7. Enter the transmission start time.Press * to select “AM” or “PM”.8. Press w.9. Press p.l To cancel after programming,press { then w.After transmission, this feature willturn off automatically.l This feature is not available forbroadcast transmission.l The calling charge may be higher.#23Sending document overseasIf you have difficulty sending anoverseas fax, activate this featurebefore starting transmission. Thisfeature makes sending documentseasier as the transmission speed isslowed down.OVERSEAS MODE=OFF [±]Feature & Display Settings How the unit operates#25Sending a fax at a specific timeThis feature allows you to takeadvantage of low-cost calling hoursoffered by your telephonecompany.l The setting can be reserved totake place up to 24 hours inadvance.DELAYED SEND=OFF [±]ONOFFON /fax no. /hh:mmOFF“ON”: The unit will print the journalreport automatically after every 30new fax communications (p. 31).Note:l Step 3 may be slightly different depending on thefeature.l See page 61 for more details.1. Press p.2. Press ( or ) until the following isdisplayed:then press w and press ( or )until the desired feature is displayed.ADVANCED MODEPRESS SET3. Press + or - until the desired setting isdisplayed.4. Press w.5. Press p.(The default setting is in bold type.)#26Setting the Caller ID list to printautomaticallyAUTO CALL. LIST=ON [±]ONOFF“ON”: The unit will print the CallerID list automatically after every 30new calls (p. 25).