If you use an extension telephone andwish to use it to receive a fax, activatethis feature, and enter the code (p. 47).l This code is also used to receivea voice message and a fax in thesame call (p. 45)(KX-FP81 only).FAX ACTIVATIONSee page 50 for details.100%92%86%72%#41ON /CODE= 9OFF1. Follow steps 1–3 above.2. Rotate to select “ON”.3. Press .4. Enter your code from 2 to 4 digits,using 0–9 and .5. Press .6. Press .l Do not enter “0000”.MENUSETSETEASY DIAL#36Features Summary70#39To adjust the display contrastLCD CONTRAST NORMALDARKER“NORMAL”: For normal contrast“DARKER”: Used when the displaycontrast is too light.1. Press .2. Rotate until “ADVANCEDMODE” is displayed.Press and rotate untilthe desired feature is displayed.3. Press .SETEASY DIALSETEASY DIALMENUProgramming table (cont.)Note:l Step 4 may be slightly different depending on thefeature.l See page 66 for more details.Advanced features (cont.)!How to set menu optionsCode Display & Feature Settings How the unit operates(The default setting is in bold type.)Setting Recording paper Original document100% A4 Letter92% A4 A486% A4 A472% A4 LegalIf the size of the document sent bythe other party is as large as, orlarger than the recording paper, theunit can reduce and print thedocument.Select the desired reduction rate.RCV REDUCTIONl If most of document sent from theother party are as long as yourrecording paper and they have along heading using a few lines,we recommend selecting 86%.4. Rotate until the desiredsetting is displayed.5. Press .6. Press .MENUSETEASY DIALONOFF#31 If you subscribe to a DistinctiveRing Service from your telephonecompany, activate this feature.RING DETECTION