1.14.3. INSTALLING THE RECORDING PAPER* A4 or Letter ** size recording paper can be loaded. The unit can hold up to 50 sheets of 60 g/m 2 to 75 g/m 2 (16 lb. to 20lb.) paperor 30 sheets of 90 g/m 2 (24 lb.) paper.*A4=210 mm × 297 mm (8 1/4" × 11 11/16")**Letter=216 mm × 279 mm (8 1/2” × 11”)For best results, only use inkjet paper such as Hammermill® Jet Print. If you use other types of paper, the print quality maybe affected.(1) Fan the stack of paper to prevent a paper jam.(2) Pull the tension bar forward and hold open while insertingthe paper.· The paper should not be over the tab.· If the paper is not inserted correctly, readjust the paperor the paper may jam.Note for recording paper:· Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or paper used forresumes.· Do not use different types or thicknesses of paper at the same time. This may cause a paper jam.· Avoid extremely smooth or shiny paper that is highly textured.· Avoid paper that is coated, damaged or wrinkled.Note:· Avoid double-sided printing· Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper may jam.· Some paper only accepts print on one side. Try using the other side of paper if you are not happy with the print quality.Trademarks:· Hammermill® is a registered trademark of INTERNATIONAL PAPER in the United States and/or other countries.15KX-FP81BX / KX-FP81CX / KX-FP82CX