Panasonic KX-HCM280A Installation/troubleshooting Manual

Also see for KX-HCM280A: Operating instructions Features guide

Installation/Troubleshooting502.4 Operation BarProblem Cause and RemedyPan/tilt, zoom,focus, click tocenter andpreset featuresdo not work.• Your PC is not connected to the camera.Click [Refresh] on the web browser. Confirm that the imagerefreshes, then try again.• The camera is not turned on.Confirm that the camera is turned on.• Multiple users are operating the camera simultaneously.Wait for a while, and access the camera again.• The pan/tilt, zoom, or focus reaches its end.Confirm that the end display is displayed on the operationbar.• The pan/tilt is restricted.Adjust the pan/tilt settings (see page 65 of the OperatingInstructions on the Setup CD-ROM).• The Automatic Focus Range is set incorrectly for the type ofimage you are viewing.Confirm the Automatic Focus Range setting (see page 65 ofthe Operating Instructions on the Setup CD-ROM). Whenviewing images within 1 m (39.4 inches) of the camera, set to"Macro". When viewing images further than 1 m(39.4 inches) from the camera, set to "Normal".Part of thebuttons on theoperation barare notdisplayed.• The feature is not permitted on the General User page.Permit the feature to be used (see page 75 of the OperatingInstructions on the Setup CD-ROM). Or log in to the cameraas an administrator.