3.6 Using the Phonebook3.6.1 Storing an Item in the Local PhonebookStoring a New Item1. In standby mode, pressMenu .2. Press [▲] or [▼] to select "New Phonebook", and then pressOK .a. Enter a name (max. 24 characters), and then pressOK .3. Press [▲] or [▼] to select a phone number type ( 1 to 5 ), and then pressOK .*1a. Enter the phone number (max. 32 digits), and then pressOK .4. Press [▲] or [▼] to select "Category Off", and then pressOK . *2a. Select a category, and then pressOK .5. To select a default number for the entry, press [▲] or [▼] to select "Default TEL No", and then pressOK. *3a. Press [▲] or [▼] to select the number to use as the default number, and then pressOK . *36. PressSave .*1 Repeat this step to add additional phone number types.*2 This step can be omitted if you do not want to assign a category.*3 This step can be omitted if you do not want to assign a default number.(The first number entered for an entry will automatically be assigned as the default number.)Note• The valid digits are "0" through "9", " ", " ", " ", "P".• To enter characters, see "2.8.3 Entering Characters".Storing an Item Using the DialingYou can dial a number first and then add it as a phonebook entry.To add a new entry using the dialing1. In standby mode, dial a number.2. Press .a. Enter a name (max. 24 characters), and then pressOK .3. Press [▲] or [▼] to select a phone number type ( 1 to 5 ), and then pressOK .*1a. Edit the phone number if desired, and then pressOK .4. Press [▲] or [▼] to select "Category Off", and then pressOK . *2a. Select a category, and then pressOK .5. To select a default number for the entry, press [▲] or [▼] to select "Default TEL No", and then pressOK. *3a. Press [▲] or [▼] to select the number to use as the default number, and then pressOK .3.6 Using the Phonebook60 Operating Instructions Document Version: 2017-08