5. Press [▲] or [▼] to select "Edit", and then pressOK .6. Press [▲] or [▼] to select the desired name, phone number, category or default telephone number, andthen pressOK .7. Edit the data as necessary, and then pressOK .8. Repeat step 6 to 7 and edit the items you want to change.9. PressSave .*1 Depending on your service provider, there are cases where this menu does not appear. In this case, step 2 is skipped.Note• To change a character or digit, press [◄] or [►] to highlight it, pressClear to delete it, and then enterthe new character or digit.• To clear an entire line, press and holdClear for more than 1 second.• To move the cursor to the left or right, press [◄] or [►] respectively.• To enter characters, see "2.8.3 Entering Characters".Editing Category NamesYou can edit the names of the categories in the phonebook.1. In standby mode, pressMenu .2. Press [▲] or [▼] to select "Basic Settings", and then pressOK .3. Press [▲] or [▼] to select "Display Option", and then pressOK .4. Press [▲] or [▼] to select "Category Name", and then pressOK .5. Press [▲] or [▼] to select the desired category number (1–9), and then pressOK .6. Enter a name for the category (max. 13 characters), and then pressOK .7. Repeat steps 5 and 6 for each category name to edit.Note• To enter characters, see "2.8.3 Entering Characters".3.6.3 Deleting a Stored Item in the Local Phonebook1. In standby mode, press .2. Press [▲] or [▼] to select "Phonebook" *1, and then pressOK .3. Enter the name or the first character(s) of the desired name, and then pressOK .4. Press [▲] or [▼] to select the desired item.5. PressMenu .6. Press [▲] or [▼] to select "Delete Number" *2, and then pressOK .7. Press [▲] or [▼] to select "Yes", and then pressOK .*1 Depending on your service provider, there are cases where this menu does not appear. In this case, step 2 is skipped.*2 To delete all items, select "Delete All" instead of "Delete Number".3.6.3 Deleting a Stored Item in the Local Phonebook62 Operating Instructions Document Version: 2017-08